Filter By:
- Bottom Brackets (262)
- Brakes/Levers/Pads (666)
- Cables (255)
- Cassettes/Freewheels (140)
- Chainrings (287)
- Chains (161)
- Cranksets (321)
- Derailleurs (144)
- Show More Categories
- Forks (261)
- Handlebar Grips/Tape (387)
- Handlebars (385)
- Headsets (220)
- Pedals (427)
- Saddles (384)
- Seatposts (129)
- Shifters (115)
- Stems (183)
- Other (2157)
- Wheels (1231)
- Tires/Tubes (1313)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Components
Single aluminium clamp design with covered/hidden bolt
- Dual-compound with soft grip area and harder endcaps for impact and scratch protection
- Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side
- Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping
- Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip
- Weight: 113g /pr
- Length: 140mm
- Diameter (rubber part): 31mm
- For handlebar diameter: 22.2mm
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.99
- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends
$0.99
• Designed to keep dust and dirt out of V-Brake cable/housing systems
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$0.99
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
$1.00
Replacement small parts for Hope disc brake Hope disc brake calipers.
$1.00 - $35.99
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$1.30
Replacement piston and seals for Hope disc brake calipers.
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.65 - $2.20
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.84 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually
$1.99
- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- Economy galvanized standard replacement cable
- AX-2654 and AX-2657 are double ended, with both Road and MTB anchors
- 1700mm length
$1.99
- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99
Replace the top bearing in your YST8300 headset with these caged ball bearings.
$1.99
- Routes cables underneath the bottom bracket
- Will not rust or corrode
$2.00
FSA Mega Exo Small Parts.
$2.00 - $3.00
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
$2.00 - $20.99
Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.
$2.00
Race Face Crank Arm Fixing Bolts
- For EXI Cranks
- Bolt Puller Cap Washer for self-extracting bolt
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.16
Hope Disc Brake Hose Small Parts
· This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$2.16
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$2.42
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.50 - $2.99
- For Race Face 30mm Cinch System cranks only
- Allows switching crank arms between bikes, such as a FatBike and an XC MTB
- Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Page 1 of 158
Next page