Handlebars

Classic Cinelli Criterium bars with a milky silver anodized finish - 6061 T6 aluminum alloy construction with center sizing sleeve - 280 grams @ 40cm: all measurements are center-to-center

A25 Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

- Ergonomically comfortable with extra flare for added control. Ideal for CX, gravel, touring and commuting, these bars are favored by off road, drop bar riders in particular - Drove bars feature enhanced bar width, flaring outwards 168 through the drop section - Durable shot peened and anodized finish with cable groove indents - 23.8mm tube with 31.8mm stem clamp bulge - 16 degree flare angle with 86mm reach, 130mm drop. Widths are measured at the lever clamp area - 6061 T6 butted, heat treated aluminum alloy

Flared Adventure and Gravel bar made of EC90 carbon composite - 16 degrees of flare (adds 68mm to bar width at tip of drops) - Each width of bar has a unique diameter and length ergonomic top section - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 208g @ 42cm (width measured center-to-center)

Flared Adventure and Gravel bar made of EC90 carbon composite - 10 degrees of flare (adds 68mm to bar width at tip of drops) - Ergonomic top section and size-specific shape to optimize strength, weight and ride feel - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 205g @ 42cm (width measured center-to-center)

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new

- Ergonomically comfortable drops with with an outward flare angle through the drop section - Flared bars enhance bar width and overall bike control, while also providing an ergonomically comfortable feel - Great for CX and Gravel racing, as well as a neat option for touring or commuting - Durable shot peened and anodized finish - 23.8mm tube with 31.8mm stem clamp bulge - 11 degree flare angle with 80mm reach, 130mm drop. Widths are measured at the lever clamp area (flare adds 40mm to the overall) - Control cable groove indents - 6061 T6 butted, heat treated aluminum alloy

A25Y Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

The EA70 is Easton’s top-end aluminum handlebar with traditional, round tops. The EA70 is given an upgrade with the new MCD shape technology, with grooves for brake and gear cable routing. This race-proven handlebar has won numerous Cyclocross Nationals titles and benefits from all of the aluminum construction techniques that Easton is famous for — including TaperWall technology. - Weight for 42cm bar (grams): 280 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Aluminum - Bar Top Style: Round

- 10-degree flare and a wide flat top for comfort and control - 6061 T6 butted aluminum - 310g (42cm)

6061 T6 double-butted aluminum alloy flat bar

- Double-butted 6061-T6 aluminum construction - RHM Shallow-ergonomic profile with more hand positions than traditional anatomic shapes - Black anodized - Drop/reach are measured center-to-center, width is measured outside-to-outside - 280g (42cm)

Vision Team clip on aerobars are fixed extensions with adjustable length. - For 31.8mm base bar - Material: Alloy - Color: black - Length: 230-270 - Defined Color: Black - Weight: 464

- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics

- Drop + Riser="Driser"\n- Stylish 20mm rise provides a higher riding position without the need for stem spacers - Profiled top tube with semi-aero ‚ palm friendly‚ design is ergonomically comfortable - An additional 16 degree flare in the drop area adds 93mm of extra ergonomic enhanced control to the overall width - A great design for CX and Gravel racing, as well as a neat option for touring or commuting - 6061 T6 butted, heat treated aluminum alloy - Durable shot peened and anodized finish - 23.8mm tube with 31.8mm stem clamp bulge - 16 degree flare angle - 75mm reach, 125mm drop (effective drop 105mm) - Widths are measured at the lever clamp area (flare adds 93mm overall) - Control cable groove indents - Black anodized with laser logos

Top off your beach or town cruiser with Sunlite's O.S. Cruiser Handlebars. They're made from lightweight aluminum so you keep your rig nice and light, and they feature the classic cruiser shape you know and love. At 27.5-inches wide, you'll be plenty comfortable as you cruise your favorite pavement or boardwalk, and the 6-inch rise lets you sit up in style to take in the scenery.

Sunlite's Road Handlebars are a light and comfortable addition to your road bike or gravel grinder. At 310 grams, this aluminum bar keeps your rig light while providing plenty of stability while cornering or sprinting for the hole shot. The classic road bend gives your bike a svelte look, too. And with plenty of widths to choose from, you get a bar that's tailored to your build and riding style.

Chrome plated with a high-rise retro design.

Forged aluminum construction with a retro curved design.

Atmos is our new premium offering for cross-country performance. The Atmos carbon flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 40mm per side allowing you to customize the bar to your preferred width. This is the lightest bar in the Atmos range. - Wide to start and trimmable by 40mm each side - Specialty tuned carbon laminate to absorb noise while maintaining stiffness - 190g at full width SPECIFICATIONS - Type: Flat - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep; 3/4 Risers have a 4deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 20 mm - Bend: 8 deg - Weight: 175 g - Width: 725 mm

The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position and the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter

The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter

State-of-the-art SuperLogic construction where weight-to-performance superiority is the ultimate object. The SuperLogic Rizer bar is the best MTB handlebar for those looking for the lightest set up possible for their XC rig. - Carbon monocoque - 15mm rise - 9 degree sweep - Width: 710mm - 31.8mm center section - Not bar end compatible - Matte UD carbon finish - Weight: 145g

- 6061-T12 aluminum with round, Compact bend and a shallow drop - easy to reach brake lever positioning - Drop: 130mm - Reach: 75mm

- Award-winning Vibrocore foam core provides vibration-damping, proven to reduce arm pump and hand-numbness - 25° aggressively flared, wide drop bar for true off-road performance and comfort - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding in a more upright, balanced stance - 8mm bar clamp extends through the top section, providing enhanced hand support and comfort without multiple wraps of tape to increase diameter - Round profile upper section facilitates a wide range of rider/hand positions and maximizes grip on the bars in rough terrain - Recommended for: ASTM 3, Gravel Features: - Key Technologies: Vibrocore, On-Off Road Geometry - Material: Zirconium Doped 7-Series Alloy - Width, Hood to Hood (c-c): 420 / 440 / 460 / 480 / 500 / 520mm - Width, Barend to Barend (o-o): 562 / 582 / 602 / 622 / 642 / 662mm - Weight (g): 345 / 350 / 355 / 370 / 375 / 380 - Drop/Reach: 110mm / 65mm (all sizes) - Flare: 25° - Ramp: 14°

The Sparrow is a touring/townie bar. - The 495mm version is more agile for squeezing through traffic than other townie/MTB bars. - The 520mm is still narrow, but with a grip area that fits levers and shifters. - The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. - Can be used flipped to be used as a riser bar or down for a less upright position. - Shotpeened Tange Aluminum - 25.4 mm clamp diameter - 50mm drop/rise - 55° backsweep - 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers. - Weight 245g (495mm)

The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable, as well as the lightest, bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter

- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos

The evolution of Ritchey handlebars continues with the WCS ErgoMax. This new bar enjoys a rich history of handlebar design and development and combines it with the modern demands of discerning riders who enjoy riding varying surfaces. Designed to enhance control and comfort when riding along loose surfaces, the ErgoMax is ideal for a gravel bike since it places the hands in a wider, more stable position while in the drops. The ErgoMax is just as perfectly situated on road bikes that are built for endurance, its ergonomics delivering unparalleled comfort. The bar tops employ a 10mm rise at the clamping area, which offers a slightly more upright riding position. They are then ovalized and have a slight 4-degree rearward sweep to more evenly distribute the weight of the rider's hands and wrists, also putting them in a more natural position. Continuing with an eye towards ergonomics, the ErgoMax also features drops with a nice, 12-degree flare to keep the rider's hands in a comfortable and confident position, while also adding a bit more unobstructed stability when turning or sprinting. The new Ritchey ErgoMax bar delivers more control, welcome comfort, and increased confidence when riding gravel, setting out on multi-day adventures, or rolling along those long miles of tarmac. - Material: triple-butted 7050 alloy - Bend style: compact - Top style: flat - Drop: 128mm - Reach: 73mm - Drop flare: 12° - Flare out: 3° - Backsweep: 5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Clip-on compatibility: no - Other features: C260 not compatible - Weight: 270g (42cm)

Same proven Ritchey quality, performance, and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. The extra-wide grip area allows plenty of room for all components and remotes of choice. - Material: carbon fiber - Width: 780mm - Rise: 15mm - Backsweep: 9° - Upsweep: 6° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 199g

We threw in a bit of everything for our take on the ultimate gravel handlebar setup. Rise, sweep, and flare make for an ultra-comfortable handlebar that keeps you in control no matter the terrain. Add the Cruise Control Top and Drop Grips and our Really Long Bar Tape to get to next-level comfort and performance. For the rider that wants to go everywhere, the Kitchen Sink Handlebar is the bar that has everything. With widths from 44 cm up to 50 cm, it's clear we believe in wide. But the added stability and control of a wider bar should not come at the cost of comfort. So we've thrown everything into this handlebar: - 20mm RISE means less pressure on the hands and a broad range of fit options. - 7° SWEEP means the bar is positioned where your hands want to be, whether you're on the flats, the hoods or the drops. - 25° FLARE on a compact drop means a stable, aerodynamic drop position that is actually comfortable enough to use. - Optional endurance loop adds an alternative aerodynamic riding position and a perfect spot for gear storage and mounting accessories.

Fast, Light, and Agile. SQlab ergonomics experts are not only quite impressive in just ergonomics, but also very well versed in high-tech, material science and carbon manufacturing. Ergonomics: With an aggressive sitting position and a handlebar width from 740mm and under 9° backsweep, the wrists are always overstretched. SQlab currently has the monopoly for aggressive MTB handlebars. Damping: The 311 FL-X has been developed with regard to flex behavior. In an elaborate study, we were able to prove that almost all high-quality handlebars have damping characteristics between 0% and 15%, depending on the intensity. The 311 FL-X is between 20% and 30%. The higher flex has no disadvantages in steering precision. The steering forces are clearly below the vertical forces. Stability: SQlab is one of only two manufacturers to remain in the big bike magazine break test without damage. - Weight: At 200g, the handlebar is one of the lightest and most stable on the market. - Area of use: MTB Race - The 12° backsweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain - The 15mm or 30mm Rise (handlebar height) allows an individual adjustment of the sitting position. - This bar utilizes a 31.8mm clamping area. If you have a 35mm stem, please refer to our shim kit.

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

- Steve Potts and the other founders of WTB originated the first "dirt drop" style bar for Specialized back in the late 1980's. Steve Potts designed this modern version with updated fit and function. - Polished aluminum finish in black and silver - Made by Nitto in Japan

Double butted 7075-T6 aluminum bar, designed and tested by Reverse Team Rider Lukas Knopf - Inscribed with his mantra - life is short - stunt it - Includes cutting lines and stem alignment guide marks

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks

Double butted 7075-T6 aluminum bar, designed and tested by Freeride legend Nico Vink - Designed for riders who value strength and reliability over light weight - Increased wall thickness to withstand the toughest abuse

- Unique multi-use bar with excellent ergonomics and adjustable extensions. - These horns and clamps are not fixed, so you can rotate them so they point toward each other or turn up. Swapping the clamps to the opposite side will yield a different extension position. - Shot peened 6061 aluminum - Forward bend from clamp area negates the need to change stems to make up for the grip area sweep. 1.5" rise for ideal positioning - Bars can be flipped for another take on moustache bars

- Inspired by the classic V-Cross BMX bars from the 80's - Constructed from butted 4130 Cro-Mo - 820mm width, can be cut to 720mm if desired

- V2 is now 760mm in lenght with updated graphics - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon is the product of an intense and in-depth research and development program - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption - Full uni-directional (UD) carbon construction with efficient orientation and placement of the fibers to maximize strength and fine tune stiffness - UD carbon fiber layup is specific to each model and rise

Cycles Camper Riser Bar - Heat-treated aluminum riser bar - Made by Nitto in Japan

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

The ergonomic evolution of Ritchey handlebars continues with the ground-breaking WCS Beacon. The most notable feature is its super-wide 36° drop flare. Aside from the unmatched ergonomic comfort and stability afforded by this wide flare, it also allows for plenty of space for handlebar packs. When riding in the drops, the Beacon doubles down on comfort with a very shallow 80mm drop and a shorter-than-usual reach. The Evo-style top section offers broad support for your hands, and it has a gentle backward sweep for a more natural hand position when riding the tops. The unconventional aesthetic of the WCS Beacon belies its comfort and practicality. Taking inspiration from the randonneur world, the Beacon allows an easy transition of the hands around the bar without upsetting bike handling when loaded with gear. The gentle change of hand position allows the body to stretch and move while keeping the bike stable. Ideal for adventure touring and bikepacking on asphalt or gravel trails—or even for urban riding—the unique WCS Beacon brings a whole new level of comfort and control. - Material: triple-butted 7050 alloy - Bend style: bio-bend - Top style: ergonomic - Drop: 80mm - Reach: 65mm - Drop flare: 36° - Flare out: 6° - Backsweep: 4.5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Weight: 270g (42cm)

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability. - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new

After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar. Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides. - Oversized 35mm Bore Carbon Handlebar - Designed for Enduro / All Mountain / Trail - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 800mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non slip stem clamping surface - Textured grip ends for added bite - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - 15mm rise: 222 grams - 25mm rise: 226 grams

- AL6061-T6 alloy construction - 16-degree flared drops for power, stability, and control - Flattened aero top and 5-degree ergo back sweep for enhanced comfort and grip - ISO-Road safety certified - Clamp Size: 31.8mm - Rise / Reach: 70mm - Upsweep / Drop: 124mm - Back Sweep / Bend: 5-degree - Color: Black - Finish: Matte - Type: Road Drop - Material: AL6061

Origin-8's Pro Urban Riser Handlebar is a wonderful city companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.

Origin-8's Pro Pulsion Bull Horn Handlebar is crafted from lightweight 6061-T6 aluminum. It features a great bullhorn shape that works great for fixed gear and city bikes. And, it comes in a bevy of colors to add some style to your ride.

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep

Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum

The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 6061-T6 aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 314g (44cm)

The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 7050-T6 series aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 281g (44cm)

The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 6061-T6 aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 322g (44cm)

The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 7050-T6 series aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 293g (44cm)

Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 6061-T6 aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 357g (44cm)

Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 189g - Note: Salt Flat bars are not compatible with bar ends

Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers

FSA's Energy Road is a traditional drop bar made from high-strength 7050-aluminium tubing. The finish is shot-peened and sandblasted on the taped areas for grip. There’s even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories. - Quad-butted, tapered and shot-peened AL7050/T10 - 120mm wide round center section for mounting accessories - 4-degree outward bend - Bar Drop: 150mm - Bar Reach: 80mm

- Economical 6066 aluminum alloy mountain handlebar - 800mm width - 3 rise options - Back sweep: 7° - 310-350g (Depending on rise dimension)