Forks

Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch

ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest Enduro tracks. Going Ultimate has its advantages—this fork has a stiff, 38mm chassis designed with the Charger 2.1 damper, DebonAir spring technology, SKF Wiper Seals, and Maxima Plush Fluid. It pairs our highest performing, athlete-proven technologies with premium style. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger 2.1 RC2 damper features independent high and low-speed compression adjustments - Dual Position Air adjustment option to change the geometry of the bike for climbs and descents - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package

For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"

A striking balance of low weight and exceptional downhill performance, the SID finds a new level of confidence and defines what modern XC race bikes are capable of. The SID Ultimate is built with more travel, an all-new stiff 35mm chassis that features our lightest damper to date, and the new Charger Race Day. This race-ready package also includes the redesigned DebonAir air spring, tuned specifically for the demands of XC riders. Our friends at SKF and Maxima Plush Fluids come along for the ride, providing long-lasting fork performance and improved overall suspension feel. Lighter and more capable than ever before, SID will get you to the finish line faster. Features - New 35mm chassis is the perfect blend of low weight and stiffness for the modern XC bike - New Charger Race Day Damper - our lightest production damper with rock-solid lockout - New DebonAir air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control - New Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Machined/anodized crown - 2-bolt mounts to fit a short fender (RockShox fender sold separately) - Ultimate foil graphics package

When performance and weight savings matter most, the new SID SL is the answer. Designed to be fast and nimble, SID SL Ultimate features our lightest damper to date, the new Charger Race Day. Completing a race-proven package, we've included the new DebonAir air spring tuned specifically for the demands of XC riders. Our friends at SKF and Maxima Plush Fluids come along for the ride providing long-lasting fork performance and improved overall suspension feel. It all adds up to the most advanced race-bred fork ever: SID SL. Features - 32mm chassis focused on low weight for the classic XC bike - Charger Race Day Damper - our lightest production damper with rock-solid lockout - DebonAir air spring is tuned specifically to meet the demands of XC and maintains a higher ride height for increased confidence and control - New Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Machined/anodized crown - Ultimate foil graphics package

ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.

A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience. - Material: Carbon - Weight: 520g - Steer Tube Length: 350mm - Rake: 50mm - Axle To Crown: 395mm - Max Rotor Size: 140mm – 160mm - Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch - Crown Race Diameter: 1.5-inch - Torque Spec - Steer Tube: 5.5Nm - Torque Spec - Axle: 8Nm

The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut

Origin-8's Cromo-Lite Combo Mountain Fork is seriously versatile. This 4130 chromoly steel fork can be used with 26- or 29-inch wheels, and is suspension corrected for a 100mm 26-inch-wheel fork. With disc mounts and linear-pull brake bosses, even your brake choices are versatile.

With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm

- Hi-tensile steel construction - Available with brake studs or without - 60mm rake - Type: Cruiser Size: 26" - Steerer Type: Threaded Steerer - Steerer Length: 250mm - Axle-to-Crown: 400mm - Axle: 3/8" - Thread Length: 125mm - O.L.D.: 100mm

With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance. - 38mm chassis for increased stiffness and rider confidence - Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound - Highly tunable DebonAir air spring offers a consistent feel throughout the travel - Maxima Plush damping fluid reduces friction and quiets damper noise - Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender - Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance

- Double air spring system with independent positive and negative chambers - Adjustable from 130 to 160mm of travel internally - Redesigned air spring with threadless air seal head for service and travel change ease - Damper: Low speed rebound in addition to high and low speed compression adjustable; with 2.5wt damper oil and 11% lighter viscosity - Air volume adjustment with internal indexed system - Threadless aluminum steerer - 35mm low friction anodized upper tubes with SKF wiper seals - Post mount brake: minimum 180mm rotor with 210mm maximum rotor size - Boost 110: allows for a hub with a wider hub flange that provides the rider with a stiffer wheel for more precise steering - D-Loc 15mm bolt-on thru-axle - 27.5"+: 75mm wide by 739mm tall maximum tire size - 29": 64mm wide by 749mm tall maximum tire size

Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible

Riding rigid isn’t for everyone, but for those who value functional simplicity, the updated ENVE Mountain Fork delivers. BOOST (15X110MM) - Material: Carbon - Accessory Mounts: Yes - Weight: 719g with Fender, 676g (w/ clasps) - Travel Correction: 120mm (Compatible with frames designed around 100mm-140mm Travel Forks) - Steerer Tube Length: 300mm - Rake: Adjustable – 44mm, 52mm - Axle To Crown: 490mm – 44mm Rake Position; 492mm – 52mm Rake Position - Brake: Disc - Brake Mount: Post Mount - Axle Compatibility: 15 x 110mm - Max Rotor Size: 180mm - Max Tire Clearance: 29 x 3.0” with Fender - Crown Race Diameter: 1.5” - Torque Spec: Steerer Tube: 5.5 Nm - Torque Spec: Axle: 8 Nm

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm • For bikes with 26-inch wheels

• Caliper brake mounts • 35mm rake • High-tensile steel construction • 1-inch steerer diameter • 165mm steerer length • Threaded fork • Compatible with 16-inch wheels

• Cantilever brake mounts • 45mm rake • Chromoly construction • 1-inch steerer diameter • 200mm steerer length • Threaded fork

• Cantilever brake mounts • Chromoly construction • Threaded fork • For 26-inch wheels • 200mm steerer length

- Brake mounts: Caliper - Construction: Hi-tensile steel - Rake: 50mm - Type: LW - Steerer type: Threaded - Race diameter: 27mm - Axle: 3/8'inch

• Cantilever brake mounts • Chromoly construction • Threadless fork • For 26-inch wheels • 250mm steerer length • 1 1/8-inch steerer diameter

• Caliper brake mounts • 35mm rake • High-tensile steel construction • 1-inch steerer diameter • 185mm steerer length • Threaded fork • Compatible with 20-inch wheels

- Replacement urban threadless forks - Accepts up to 40mm tire width - Chromoly construction - 1-1/8" steer tube - Size: 700C - Steerer Type: Threadless - Steerer Length: 300mm - Material: Chromoly - Offset: 45mm - Axle-to-Crown: 405mm - Race Diameter: 30mm - Axle: QR

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look

- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs

Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New graphics package for a fresh, premium look - Motion Control damping featuring low-speed compression adjustment

- Designed to match the Pake Rum Runner Track frames - Straight legs with unicrown CrMo construction - 300mm CrMo steerer with 38mm rake

The MCX Max is a monster cross/gravel carbon fork with clearance to fit 29 x 2.1" tires and 27.5" x 2.25" tires - with practical mud clearance. Extra long 350mm aluminum steerer (Most carbon forks have steerers only 280-300mm long) NOTE: Newer stock will come with a thru-axle bolt instead of a thru-axle with QR cam lever (There are also two lighter MCX models that have straight 1-1/8" steerers and are available in QR or thru-axle. ) – Axle to crown: 406mm – Rake: 50mm – 15mm x 100 thru-axle – Disc brake mount: Flat mount – Internal cable routing – 3-pack mount accessory bosses (3kg capacity per leg) – Single set of fender eyelets – Steerer: Aluminum, 1-1/8"-1-1/2" tapered x 350mm – Weight: 970g (including thru-axle and extra long uncut steerer)

Laterally stiff and fine riding steel-lugged cross fork. Features a sloping lugged crown with cutouts on outside tangs, long inside tangs, and an International Standard disc tab. - Tange Infinity chromoly steel blades and steerer - Rack eyelets for fenders and braze-ons for low-rider panniers - 1 1/8" threadless steerer - 350mm long steerer - 44mm rake - 400mm axle to crown - 60mm inside width - Lugged Cross fork to match Double Cross Cyclocross frames - Lugged crown with Tange CrMo construction - Features eyelets for front rack and braze-ons for low-rider panniers

XFusion’s RC32 series family is our all-never 32mm stanchion, 27.5 specific, XC, and trail fork. It has up to 130 mm of travel, remote compatible, or lever-actuated lockout. In addition to the performance features, the RC32 is offered with either 1 1/8” or tapered steer tube configurations. FEATURES - The RC damper has low-speed compression and near-lockout firmness - Remote Lockout Capable SPECIFICATIONS - Weight: 4.1 pounds/1870 grams - Wheel Size: 27.5 inch - Travel: 130mm (ITA 80/100/130mm) - Stanchion: 32mm Aluminum - Spring: Air - Damper: RC Cartridge Damper - Adjustments: Compression(open to firm), Rebound, Air Spring - Steerer: Taper Standard - Colors: Flat Black - Axle to Crown: 510mm @ 120mm of travel - Offset:46mm - Max Rotor Size: 180mm

The new Mattoc is the fruit of one of the most profound development cycles in Manitou history. It is the physical embodiment of “great things take time”. It is not an offering that follows the crowd, designed around the latest trend or buzz of the market. Rather, a component that aims to add real value and benefit to the rider. Capable of not only pulling duty in a range of disciplines ranging from XC to light enduro but doing so with zero compromise makes the Mattoc “best-in-class” ! The lightest, stiffest, and most tunable fork over more segments than any of its competitors, the Mattoc PRO is an amazingly versatile product capable of vastly improving your time in the saddle. At 1750 grams it is a featherweight solution given its wide travel range, yet its industry leading stiffness lends it to a performance without rival. Consider also its amazing reliability and you have a fork that does it all and does it amazingly. A true, no-compromise, authentic fork, serving the real needs of the widest range of the mtb public and offering serious performance advantages to each individual one of them, no matter how they choose to ride. The Dorado Air spring with IRT allows for an extremely lightweight build yet a suspension performance derived from our top-of-the-line DH fork. Compression damping via MC2 Sealed Cartridge with HBO technology and a sealed damper TPC for rebound, and you’ve got yourself an extremely sophisticated piece of suspension technology. Adjustable Air, IRT, Rebound, High and Low Speed compression make for perhaps the most tunable, personalized custom performance suspension solution available on the market. Include all of this technology into an extremely stiff, reliable, 1750 gram package and you have a ride-changing component that is the envy of the industry. KEY FEATURES - 59 grams decrease from the previous model. - Over 19% stiffness increase from current 27.5” 160mm to new 27.5” 150mm. 29” Stiffness increases are higher. - DoradoTM air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm. - Dorado Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Dorado Air is our lightest weight air spring technology. - Infinite Rate TuneTM (IRT) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that effects only the middle to end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. - Sealed Dampers offer more consistent damping and lighter break away force, especially over long descents. Our Damper uses a bladder system to compensate for head build up along with a relief valve. Using both systems give us consistency along with long service life. Having non adjustable HBO eases setup for the user. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Releasing casting pressure can improve overall fork feel and small bump compliance.

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included

Upgrade your road rig with Origin-8's Cromo-Lite II Road fork. It features full cromoly construction for a sublimely smooth ride.

This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires

The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends. - Axle-to-crown: 420mm - Offset: 43 - Steerer: 340mm - Tire Clearance: 71mm (2.8") - Weight: 1190g (2.62 lbs)

- Chromoly steel BMX style forks - Perfect replacement for modern BMX-inspired wheelie bikes - Steerer Type: Threadless - Steerer Size: 1-1/8-inch - Material: Chromoly - Race Diameter: 30mm - Axle: 3/8-inch

The ZEB is built with a stout, 38mm chassis and features the updated DebonAir spring with the performance of the Charger R damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New, price point Charger R cartridge damper featuring an easy-to-adjust damper with just rebound adjustment - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise

The ZEB Select is packed with performance in a stout 38mm chassis and features the updated DebonAir air spring with the trusted Charger RC damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance anywhere you need it to be. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper features low-speed compression adjustment - Dual Position Air adjustment option to change the geometry of the bike for climbs and descents - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise

- 35mm chassis at home on the trail - stiff, playful, and light, really light - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise

- 35mm chassis at home on the trail - stiff, playful and light, really light - ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork’s bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included

- Performance-packed, featuring an updated 38mm chassis, now compatible with new Pressure Relief Valves. - 38mm chassis for increased stiffness and rider confidence - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - Compatible with new Pressure Relief Valves - Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride - Bolt-in torque cap adapters now included for the use with standard hub end caps

- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork is tailored for smaller racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts. FEATURES - Overall Reduced Size for Smaller Racers - 1 Inch 7000 Series Aluminum Steerer Tube - Internal Butterfly Steerer Tube and Fork Crown Interface - 10mm Standard Dropouts - Cold-Forged and Bolded Dropouts COMPATIBILITY - Box One Stem Spacers - Box Two Stem Spacers - Box Two Threadless Headset - Box Two 1" Integrated Headset - Box Two 1" Integrated Conversion Headset - Box Two Headset Adapters - Box Two Top Load 1" Stem - Box Hex Lab 1" Stem - Box Two Center Clamp 1" Stem SPECIFICATIONS - 20 Inch - Material High Modulus Unidirectional Carbon Fiber Construction - Steerer Material 7000 Series Aluminum - Finish High Gloss Black - Offset 32mm - Steerer Tube 1 Inch - Weight 397g/14.0oz

Upgrade your road rig with Origin-8's Pro Pulsion Synergy Fork. It features an aluminum steerer with oversize, carbon fiber legs to soak up road chatter. With a striking 3K weave finish, the Synergy fork looks as nice as it rides.

- Replacement damper kits

Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.

Road-race. Specific. Performance. Futura Caliper is the most updated creation of the Columbus Carbon Lab department for lovers of the traditional caliper brake. The all-new Futura range completes its offer with an exclusive fork, designed for the rider, starting from bike geometry and biomechanics requirements and needs. In fact, the Futura Caliper is the only oversized 1-1/2” tapered fork with multiple-rake: 45 and 50mm options that allow the cyclist, and even before him, the framebuilder, to properly complete their bicycles with the proper geometry and solutions, according to body requirements, sizes and riding style. Realized using ultra-light aerospace carbon fiber, Futura Caliper offers an extremely sharp riding experience thanks to its oversized sections and shapes, designed for an overall weight reduction of the structure, enhancing its stiffness and precision while cornering. The streamlined tapered front section, together with the curvilinear geometry of the blades, minimize aerodynamic resistance, granting a good vibration-dumping attitude, where, the overall aesthetic result, enhance Futura Caliper capability to perfectly match and complete the most updated carbon fiber frames as well as the new-generation hi-performance steel, alu and titanium designs. - T700S monocoque carbon fiber - 300mm tapered carbon steerer - Clearance for up to 28c tires - 9x100mm carbon fiber dropouts - 350g

The most iconic fork in the Columbus carbon range: clean, elegant lines, the Minimal is a monocoque carbon fork designed for frames with traditional steerers and satisfies a variety of rakes and steerer diameters. The Minimal fork, in fact, is available both in a standard 1-1/8” diameter as well as in a 1” version, as well as the option of a traditional 45mm or 50 mm rake. Whether it’s a lugged or TIG welded frame, a standard geometry, or a frame designed for a small-statured rider, the Minimal fork offers a wide range of options, providing frame builders and riders with the best structural solutions and performance possible. A Timeless model, the Minimal is adopted by classic traditional frame builders using standard tubing, as well as modern constructions using shaped and oriented tubes. - T700S monocoque carbon fiber - 300mm straight 1 or 1-1/8 carbon steerer - Clearance for up to 25c tires - 9x100mm aluminum dropouts - 45mm rake - 340g

Upgrade your road rig with Origin-8's Synergy Fork. It features an 4130 chromoly-steel steerer with oversize, carbon fiber legs to soak up road chatter. With a striking 3K weave finish, the Synergy fork looks as nice as it rides.

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

For all the ups, downs and to get you to everything in between. Lyrik Select combines an updated DebonAir air spring with the trusted Charger RC damper for unmatched trail control and precision. Maxima Plush fluid reduces friction, silences noise, and provides all-around lasting performance. Features: - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper featuring low speed compression adjust - Maxima Plush damping fluid reduces friction and silences damper noise

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible

Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Welcome Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. Features - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment - Offset: 40mm

Revelation is all grown up and ready to explore, wherever the trail may turn. Value-packed, the Revelation features an updated DebonAir spring paired with a Motion Control damper and 35mm Fast Black upper tubes. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Motion Control damping featuring low-speed compression adjustment to firm - Chassis is derived from the renowned Pike fork - New graphics package for a fresh, premium look

The new Rudy is a perfect match for your gravel bike. It's energy-efficient for straightaways and offers enough travel to keep you comfortably in control when things get rough. Featuring all-new 30mm upper tubes built around the Charger Race Day damper (our lightest damper ever) and our proven SoloAir spring. Rudy offers precise steering, full or short fender compatibility, and the looks to make your road bike proud. Everything designed with the needs of gravel riders in mind. - Purpose-built and laser-focused on gravel and e-gravel bikes - 30mm upper tubes are light and look the part - 30mm and 40mm travel options - Charger Race Day damper tuned for gravel needs with rock-solid lockout and a full range of rebound adjust - Solo Air spring perfectly tuned for shorter travel and efficiency over bumps - Short fender compatibility with a 3-bolt system - Full fender compatibility with custom stealth stay bosses - Lightweight machined and anodized crown offers a premium and durable finish - Maxima Plush damping fluid reduces friction and silences damper noise - Up to 700x50 tire clearance - Available in new Kwiqsand Signature colorway or Gloss Black - E-bike approved

The Cane Creek Helm MKII Coil Suspension Fork features an upgraded damper design for increased support and control. - Compression and midvalve circuit offer increased support and control - SKF oil seal head cartridge and wiper seals are low friction - Damping features include: high speed compression, low speed compression, low speed rebound - Adjustment options include: high speed compression (10 positions), low speed compression (17 positions), low speed rebound (10 positions), indexed travel adjust system, spring pre-load adjust - Lightweight coil spring - 55 lb Lightweight Coil Spring included from factory

Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Hello Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment

The Z1 is freedom from the status quo. Step outside enduro's obsession with counting seconds and go have some fun in the woods. The Z1 is an aggressive all-mountain and enduro fork with a different viewpoint for riders' priorities. Everyone wants suspension performance that's smooth as butter with great traction and control, and that's where the Z1 shines. After that, the Z1 departs from industry norms. More time fiddling with adjustments means less time shredding the trails. The Z1 keeps it simple with intuitive compression sweep adjustment, from locked out to full open. Simple rebound adjustment covers the range from fast to slow rebound for a full range of rider weights and preferences without overcomplicating things. Plus, it's biased towards stiffness, ride performance, and durability, so while it's carrying a few extra grams, you probably won't notice because you're having too much fun. - 36mm stanchions - Enhanced lower leg stiffness with "M" arch design for maximum tire clearance - 15 QR x 110mm Boost axle - FIT GRIP damper with adjustable compression and rebound - FLOAT EVOL air spring