Tools/Maintenance

The Sport Mechanic Bike Repair Stand prioritizes the most critical aspects of the entire Feedback Sports bike repair stand lineup – compatibility, stability, durability and portability. The 360-degree rotating clamp uses a spinner knob closure that can accommodate up to 1.9? (4.8cm) and support 65lbs (29.5kg). Plus, the Sport Mechanic leverages the same 54? (137cm) wide base, with rubber-coated end caps, for amazing stability on any surface. And when the service day is done, it folds in to a compact unit for storage or travel. Add an available Travel Bag and a Tool Tray for the optimal bike maintenance setup.

Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.

- Biodegradable foaming wash that is easy to use and powerful enough to remove embedded grease and grime - Prevents component wear, damage and surface scratching - Safe for use on all bike surfaces including carbon fiber, titanium, chrome, aluminum, rubber and plastics - Volume: 32oz/946ml

Hydrodynamic Chain Lube is the ultimate in bicycle chain lubricant technology. If you are looking for the most efficient chain lubricant formula for long distances and/or the harshest of weather conditions, look no further. - Ideal for Road Cycling and Cyclocross - Provides the ultimate performance in both wet and damp or dry and dusty conditions - Petroleum free formula for eco protection - Synthetic polymers for long distance performance - Incredible durability - Pipette system for easy application

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

- PLUSH Suspension Oil - Formulated specifically for mountain bike suspensions - Designed for use in both forks and shocks - Reduces stiction and running friction - Consistent damping performance at any temperature - Proprietary additive system minimizes oxidation, corrosion and wear - Designed to protect seals and extend time between rebuilds

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

Frees corroded nuts and bolts by quickly penetrating rust. - Safe for use on plastics, rubber and metal

Whether you own an automotive shop, are a DIY weekend warrior, or are simply cleaning the garage, Scott® Shop Towels are a must in your list of supplies. A multi-purpose towel that’s 2x more durable when wet when compared to the leading value kitchen brand towel and absorbent for cleaning up grease, liquid, oils, and spills. - A disposable shop towel handy for cleaning up oil, grease, and other spills - 55 towels per roll

The #1-selling penetrant since 1957, PB B'laster quickly busts loose rusted, or frozen parts caused by rust and corrosion. It also contains a non-evaporating lubricant that saves time and equipment and protects against further rust and corrosion. Features - #1-Selling Penetrant - Breaks Free Rusted or Frozen Parts - Protects Against Further Rust and Corrosion - Use on Automotive, Industrial, Marine, Plumbing & Other Equipment - New ProStraw® with Control Flow Technology® (part# 16-PB-DS)

For dry and arid riding conditions. - Special polymers form a dry film to protect your chain and repel dirt to maintain a clean, quiet drivetrain - Law prohibits Hazmat materials from shipping by air

Refined functionality The Bontrager Elite Multi-Tool combines smooth style with practical design. This elegant tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - CNC-machined keys for lightweight durability - 2,2.5,3,4,5,6, and 8 hex along with Phillips, flat and T25 - Slim profile makes it easy to pack on any ride - Ultra-light aluminum alloy design

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-1.2 is intuitive and easy to use, and applies up to 14 Nm of torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fiber components. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet. - 0 to 14 Newton meter (0 to 140 inch-pound) range - 3/8" drive - Reads and registers torque values for both left hand and right hand threading - Length: 11.5" (292 mm)

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.

Park's Heavy-Duty Tire Levers handle the toughest tire-and-rim combinations including difficult downhill and freestyle tires. Their specially designed tips engage the tire bead so it can be removed with just two levers. Plus, these beefy, forged-steel levers are a full 8-inches long for superior leverage.

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

A great way to hold small parts, tools and components during a repair, Park Tool's Benchtop Overhaul Mat features multiple small pockets and one large work area. It's perfect for suspension work or to organize parts for installation. • Made of a rubber-like PVC • Cleans easily and looks great on any bench • Measures: 14.7” x 7” (38cm x 18cm)

For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.

"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"

Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!

- For hydraulic braking systems - Non-corrosive mineral oil - Excellent heat managment properties - Volumes : 50ml or 1000ml

- Tensioners for 10mm axle Track, Fixed Gear, BMX, Singlespeed applications - Steel construction with socket for hex wrench adjustment, wrench included - Fits larger 8mm thick dropouts such as aluminum frames - Sold individually

Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

The BK-UK includes six new and revised parts for the Park Tool BKD-1 and BKM-1 Hydraulic Brake Bleed Kits, allowing for compatibility with the latest brake models from popular manufacturers. Includes: - Part #2600A (x2) — M4 x 0.8 adaptor for use with SRAM DB8, Trick Stuff, and Campagnolo mineral oil brake systems - Part #2588.2 — Thin-walled hose compression sleeve for internal bleed nipples, such as those found on Shimano mineral oil brake systems - Part #2574A — Hose assembly with integrated fitting for bleed nipples such as those found on Shimano mineral oil brake systems - Part #2615-2 (x2) — 11 mm bleed blocks for use with Hayes DOT brake systems All parts also available individually. NOTE: The seals on each part are designed for one type of fluid — DOT fluid or mineral oil — and should be used only on the systems they were intended for. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure.

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

When we launched Secret Chain Lube, Josh admitted that the starting point for this product was a hot wax recipe he had used for years with pro teams that had won numerous world and Olympic medals. The idea behind Secret Chain Lube was to bring this technology to a lube that didn't require hot melting, but it turns out many of our customers were already big fans of hot waxing chains, and the requests flooded in for us to release the SILCA Secret Wax Blend...so here it is! Consisting of highly refined laboratory-grade paraffin and a high concentration of 3 specific sizes of nano-scale Tungsten disulfide, Secret Chain Blend not only acts as a lubricant but actually acts to modify the surface of the chain, filling in all of the crevices of the metal with highly lubricious and wear-resistant tungsten disulfide particles. As a result, chains waxed with Secret Chain Blend and Secret Chain Lube will actually get faster over time and after repeated waxings. Secret Chain Blend is the only hot wax lubricant to have a specifically matched and compatible drip wax that can be used to 'top off' the wax as needed, extending the duration between hot wax applications, and guaranteeing the quietest running drivetrain possible. Using the combination of Secret Chain Blend and Secret Chain Lube can dramatically extend the chain and drivetrain component life (up to 10x). - 500g / 17.6oz pouch - The chain should be VERY clean and dry before applying

Representing the next evolution of our flagship repair stand, the new Pro Mechanic builds on the longstanding reputation of its predecessor, the Pro Elite. With upgraded clamp jaws, clutch components, and mast hardware, the Pro Mechanic is more durable, more stable, easier to use, and even more reliable. The updated front spinner knob on our patented Speed Ratchet clamp head makes operation even faster, and the revised rotating clutch internals hold bikes more securely. This is the premier bike repair stand for mechanics who value class-leading lightweight, compact folded size, and rugged durability combined with unmatched stability, adjustability, and portability. Features: - Patented, ratcheting action seatpost clamp features a spinner knob for fast, one-handed operation and a push-button release. - Updated with more holding force, the 360-degree rotating clamp design provides easy access to any part of your bicycle. - Frame clamp positions from 42"-67" (107-170cm) in height. - Secure clamp with micro-adjustment secures and protects expensive components and beautifully painted frames. - New, rubber clamp jaw covers are tool-free and replaceable. - Clamp opening up to 2.6" (6.6cm) accommodates the largest diameter frame tubes. - Anodized 6061 T6 aluminum construction is ultralight, corrosion resistant, and incredibly durable. - Sturdy metal fittings and quick releases for a lifetime of duty in the field or at home. - Stiff tripod base and rubber-coated end caps create ultimate stability even on uneven surfaces. - Working load range of 10-35lbs (4.5-16kg) accommodates service on road, cyclocross, and XC mountain bikes. Maximum capacity 75lbs (34kg). - Portable and compact construction creates a remarkably small folded footprint of 5" x 8" x 45" (13 x 20 x 115cm). - Available travel bag is water-resistant, durable, and padded to protect your stand and your other equipment. - Quick-release fittings make setup and storage fast and convenient. - At 12.6 lbs (5.7kg), traveling with this repair stand is easy. - A full ensemble of repair parts is available for long-term serviceability. - 3-Year Warranty.

Eliminate brake pad and rotor rubbing by using our updated Rotor Truing Fork 2.0 to keep any brake rotor perfectly true. Compact, portable, and lightweight, yet comfortable and effective to use thanks to the strong steel core and overmolded grip. With two different tuning depths for repairing shallow and sharp deformations, this is the ideal solution for truing disc brakes on road bikes, mountain bikes, electric bikes, urban and ?tness bikes.

The Feedback Sports Chain Tool 3.0 is designed to work with 1–12 Shimano, 1–12 SRAM, and 13 speed Campagnolo. Features a 360 degree backside plate support structure to ensure chain pins are pressed perfectly, every time. - Oversized, comfortable, knurled texture rubber handle provides secure grip - Broad, high-leverage pin press paddle makes quick work of the most stubborn chain pins - Soft close push pin handle - CNC-machined pin driver threads provide deliberate and consistent pressure for efficient pressing - Compatible with Shimano and SRAM 7, 8, 9, 10, 11, 12 speed chains, and single-speed style chains - Extra replacement pin included, conveniently secured inside storage cavity in the handle - Limited lifetime warranty; fully serviceable

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or MATTONE. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Nove (No-vay) 9 forged and plated tools: Hex 2/3/4/5/6/8 +Torx 25 +PH2/Flat - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - NOVE- 79 grams

Hirobel is a specially designed clamp for bicycle repair stands that makes it easier to work on your bike. It better distributes stresses and loads through the bicycle frame, offering superior stability while eliminating possible crushing or damage to thin-walled and shaped tubing. The pressure clamps used on contemporary workstands were developed for round steel tubing more than 40 years ago, predating carbon fiber, aluminum, aerodynamic and oversized tube shapes, integrated seat masts, dropper posts, and suspension systems. These legacy designs assume your bicycle tubing to be both round and straight, and when it is not, the clamp can impart very high point loads at the clamp edges causing finish damage, internal carbon layup damage, or outright crushing of tubes on the lightest designs. With Hirobel, specially shaped, paint-friendly cones and bindings cradle the frame at the tube intersections, where wall thicknesses are higher and forces can be distributed over much larger surface areas. Adjustable and adaptable for any possible frame design, the Hirobel also allows the repair stand clamp to be located closer to the bicycle center of gravity. This improves stability and eliminates bouncing of the bike during heavier work while also locating the drivetrain consistently higher for the mechanic, improving visibility while reducing back strain.

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

Engineered for fit, function, and leverage, these L-shaped shop-quality Torx compatible wrenches are a must have for every workshop. - High-torque, industrial steel wrenches - Torx compatible drivers at each end - Includes T6, T8, T10, T15, T20, T25, T30, and T40 - Comfortable, ergonomically designed nylon handles fit perfectly in your hand - Durable wall/pegboard mount tool holder allows easy access and organization

The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle and 5mm quick release bikes

This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum

• 2/2.5/3/4/5/6mm sizes • On a ring

- Laser-cut single-ended cone wrenches in a variety of common sizes - A must for any home, garage or shop

- Mini torque wrench preset to 5 newton meters - Includes 3, 4, 5, and 6mm hex bits, T20 and T25 torx bits

- Heat treated - Individual hex keys

• Fits Sunrace style TIW clusters

Sunlite's Mini Chain Tool is small and light, so it fits in tight places and packs easily (that's a hint that you should carry it on every ride.) But don't let its small stature fool you: you get plenty of leverage thanks to wide handles.

• 5/6mm hex wrenches

• For adding or replacing cage & rack mounts • Inserts are 10 to a bag • M5 x 12mm Steel Insert

- Compact tool for removing valve cores from Schrader valves, Presta valves, and valve extenders - Easily fits in any bag or jersey pocket

- Bit socket with 1/4 inch drive and holding function. - "Take it easy" Tool Finder with color coding according to size

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

If you are looking for the absolutely strongest, most bad-ass tire lever, perfect for the toughest downhill and freeride tires, you've come to the right place. Pedro's downhill tire lever features heat-treated tool steel construction for unmatched strength and reliability, 275mm (10.8") length for incredible leverage, a large shovel tip that holds tight on the bead, a smooth curved shape with polished finished to protect tires and rims, and an ergonomic dual density screw driver style handle providing comfort and security. - Heat-treated tool steel construction for unmatched strength - 275mm length for incredible leverage on tough downhill and freeride tires - Large shovel tip holds tight on bead while smooth finish protects tire and rim - Ergonomic handle provides comfort and security

Aqua Proof Paste is the magic goop for installing bottom brackets and keeping them quiet. In the Kogel office, it's known as 'Shut up Grease'. Aqua Proof was developed by Morgan Blue from Belgium for the offshore industry. It's saltwater resistant, does not degrade over time, and is a long-time favorite of the UCI world tour mechanics. It works on any pressed or threaded surface to avoid corrosion. You'll find yourself using it for a lot more than just installing bottom brackets. The 5ml size is for a single bottom bracket installation, the 200ml jar will last a long time, even for professional use. - Recommended for all bottom-bracket installations - Also works on thread and headset installation - 5ml syringe is enough for a single installation - 200ml jar for shop use

Our Bio-Lube is a lighter lubricant than our Tenacious Oil. Bio-Lube is made using all-natural ingredients and works as a fair-weather lubricant, as well as an all-purpose household lubricant. It is environmentally friendly, non-toxic, and completely biodegradable. - Bio-Lube is made using all-natural ingredients and works as a fair-weather lubricant, as well as an all-purpose household lubricant - Bio-Lube is a lighter lubricant than our Tenacious Oil - Environmentally friendly, non-toxic, and completely biodegradable

Breathe new life into any Fox fork/shock seals - Fox's proprietary blend with anti-friction additives and molybdenum lubricates and protects seals - Use when rebuilding Fox suspension to lubricate foam rings and seals

Regular lubrication of bicycle chains addresses annoying squeaks and noises, and extends the life of the chain and drivetrain components. Formulated using a proprietary blend of oils, Park Tool CL-1.2 Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Compatible with all bicycle chains. Also works great as general-purpose light lubricant for use on bicycle brake and derailleur cables and housing, spoke nipples, and derailleur and brake pivots. - 4 fl. oz. (118 mL) bottle NOTE: Some painted surfaces can be sensitive to oil and grease. Clean off any excess oil or grease immediately. Test first on an inconspicuous area to see if it causes a stain or discoloration.

- Pocket sized chain tool that mates perfectly with Topeak ratchets and torque tools - Compatible with single and multispeed chains up to 12 speed including Capagnolo chains - Includes a 4/5mm allen key and a chain hook as well as a rubber clip to hold