Filter By:
Hubs
$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
The splined freehubs have 28 points of engagement, the XD driver has 56.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity.
- Weight: 277g
- Includes 12mm thru-axle end caps and quick release skewer
- Drive Side Center To Flange 18.5mm
- Non-Drive Center to Flange 34mm
- Non-Drive Flange Diameter 58mm
- Drive Side Flange Diameter 49mm
$99.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
$379.99
At the Center of It All
Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design.
Power To The Pedal
Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power.
Overbuilt But Not Overkill
With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.
$254.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
J-Bend/QR:
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 32.95mm
- LTF-R: 48.45mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
J-Bend/142 x 12mm:
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 36.45mm
- LTF-R: 51.95mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
Straight Pull/QR:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 36.2mm
- LTF-R: 50.1mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm
Straight Pull/142 x 12mm:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 39.7mm
- LTF-R: 53.6mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm
$35.95
- Aluminum hubs
- Loose ball
- Bolt-on
- Axle: B/O 3/8
- Material: Aly
- Color: Blk
- Brake Type: 6B
- OLD: 135mm
$214.99 - $219.99
- Tough on trail and light on price rated for everything from XC to Enduro and E-bike
- Steel axles cartridge bearings robust alloy hub shell and steel cassette body
- 10-degree pawl engagement
- International Standard 6-bolt disc mount
- *Shimano/SRAM
$191.99 - $196.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
- Weight: 313 grams
$35.95
- 10 x 135mm adapters for 6-Drive rear road disc hub
- Includes: two adapters and one disc rotor spacer
- Conversion kits for Spin Doctor 6-Drive hubs are not compatible with original Spin Doctor and Spin Doctor Pro hubs
$85.00
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do.
They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability.
Front hub specs:
- Weight: 198g
- Torque Spec: 33nm (25ft lbs.)
- Non-Drive Side Center to Flange: 34mm
- Drive Side Center to Flange: 34mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
Rear hub specs:
- Weight: 234g
- Torque Spec: 33nm (25ft.lbs.)
- Non-Drive Side Center to Flange: 29mm
- Drive Side Center to Flange: 29mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
$72.49
- Aluminum hub body
- Sealed bearings
- 6-bolt disc rotor mount
- 15mm (See MT-3100) or 20mm thru-axle
- 32 or 36-hole spoke drilling
$101.99 - $167.49
- Elite Series convertible road disc hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt and Center Lock disc brake rotor options
- Sealed bearings
- Material: AL6061
Straight Pull Spoke/6-Bolt Disc:
PCD-L: 36mm
PCD-R: 36mm
LTF-L: 27.75mm
LTF-R: 15.25mm
CTF-L: 22.25mm
CTF-R: 34.75mm
J-Bend Spoke/Centerlock Disc:
PCD-L: 45mm
PCD-R: 45mm
LTF-L: 27.25mm
LTF-R: 15.45mm
CTF-L: 22.75mm
CTF-R: 34.55mm
$212.49
- Elite Series road hubs
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- Sealed bearings
- Material: AL6061
- Brake Type: Rim
- OLD: 130mm
Straight Pull Spoke:
PCD-L: 32mm
PCD-R: 52.5mm
LTF-L: 27.7mm
LTF-R: 50.8mm
CTF-L: 37.45mm
CTF-R: 14.35mm
J-Bend Spoke:
PCD-L: 38.5mm
PCD-R: 50.6mm
LTF-L: 27.45mm
LTF-R: 49.05mm
CTF-L: 37.7mm
CTF-R: 16.1mm
$149.90
- Produced by one of Japan's oldest hub makers
- Silky smooth Japanese sealed cartridge bearings
- High polished finish
- Choose fixed/free or fixed/fixed flip-flop rear hub
- Hub spacing: 120mm OLD
$126.49
- Aluminum alloy shells resist corrosion and provide lightweight longevity
- Sealed cartridge bearings offer smooth operation while resisting contaminants
- Thru axle design with 8-10 speed cassette and XD drivetrain options
- Brake Type: 6B
$94.99 - $199.99
Product specs:
- Front hub features
- 7075 t6 alloy axle
- Qr or 15mm axle type
- Japanese cartridge bearings
- 28,32 hole count
- 205g
- Rear hub features
- 7075 t6 alloy axle
- Qr or 12x142mm axle type
- Four sealed cartridge bearings
- 28,32 hole count
- 325g
$322.00
WHY WE MAKE THIS
Originally, we made this hub to be the cornerstone of our hub product line. It was one of those product releases where we put all our hub and bearing experience into, and ended up with a hub that struck that perfect balance between weight, performance, durability and looks. Since the advent of disc brakes (and the R45D), we keep making it, because it’s still that cornerstone hub, and so many of our riders still love to rock their rim brakes on road and off.
WHY YOU WANT IT
The R45 front hub is lighter and more aerodynamic than most built-to-last hubs on the market. We use a narrow hub body and low flanges to make the R45 a rock solid starting point for any fast wheel build.
Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use.
-Steel Bearings
- Engineered, manufactured, and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our R45 Hub Service Tool
- Available in 28h and 32h
- Ceramic bearing upgrade available
HUB SPECIFICATIONS
- Axle Width: 100mm
- Flange Diameter DS & NDS: 39.8mm
- Center to Flange DS: 34.8mm
- Center to Flange NDS: 34.8mm
$166.99
Featuring WTP's very own, patented 3-point clutch friction system, the Helix hub will take you backwards in style and hold up to any peg abuse that comes its way.
- Unique internal arrangement with face-bearing clutch stopper
- WTP Patented "Tri-Point" friction system
- Hub Drilling: 32
- Cassette Body Type: Single Cog Driver
- Axle Size: 14mm
- Spoke Interface: J-Bend
$714.90
The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings.
The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.
$436.90 - $465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$714.90
Aluminum rear hub for bicycle - 18P DBCL 24 holes, straightpull, black. Aluminum Campagnolo freehub body, black.
- Dimension: 12x142mm
$436.90 - $465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$118.99 - $126.49
- Forged alloy construction
- Sealed Cartridge bearings
- Double contact seals
- 6-bolt disc
- 12x142mm rear spacing
- Aluminum hub body
$105.99 - $114.99
- Centerlock, 11-speed compatible road hubs
- Sealed bearings keep out contamination and dirt while providing a smooth rotation
- Skewer included
$111.95
- 11-speed compatible road hubs
- Sealed bearings keep out contamination and dirt while providing a smooth rotation
- Skewer included
Specifications:
- Use: RR
- Gears: 8-11s Cass
- Drilling: 24H
- Spacing / Axle: 12TA
- Brake Type: CL
- Bearing Type: Sealed
- Bearing Model: 6902
- Bearing Size: 15x28x7
Page 1 of 5
Next page